STABILITY CHAMBERS
REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.
SALIENT FEATURES
- Fulfills storage conditions of 25°C “ 60% RH, 40°C “ 75% M RH, 30°C “ 65% RH, 25°C “ 40% RH
- Precise monitoring of temperature and humidity conditions
- Unique design of thermal barrier for better energy efficiency
- Machine filled PUF insulation to eliminate void pockets
- Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters
- Hermetically sealed Compressor with CFC free refrigerant
- Chamber calibration port on side
- Adjustable trays
- Output for remote alarm
- Microprocessor controller with LCD display & capacitance type sensor
- 4 ” attractive LCD display for direct display of humidity & temperature
- Auto tuning of controller
- Battery Backup for Controller
- Settable High / Low alarm points
- Centronic interface to record temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
- REMI ‘Datasoft’ data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
- Power failure and resumption recorded with date and time
- PC communication through RS “ 485 with data acquisition software
- High temperature safety cut off & alarms for high/low set parameters
- Low water level alarm and power cutoff of boiler tank heater
- Time delay for compressor switch on
- Overload cut off relay for compressor
- Rounded inner chamber for easy cleaning
- Auto door closer
- Attractive door profile
- Data logger for 8 point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
- Optional
- Touch screen display ( TFT ) with additional features(Details overleaf)
- Validation protocol with IQ, OQ, PQ Documentation
Technical Data | |||||||
SC-6 Plus | SC-10 Plus | SC-12 Plus | SC-16 Plus | SC-19 Plus | SC-28 Plus | SC-35 Plus | |
---|---|---|---|---|---|---|---|
internal Volume (Liters) | 200 | 280 | 370 | 450 | 540 | 800 | 1000 |
Number of tray | 2 | 3 | 4 | 5 | 6 | 6 | 7 |
Internal Dimensions W x D x H (mm) | 660 x 655 x 450 | 660 x 655 x 650 | 660 x 655 x 850 | 660 x 655 x 1050 | 660 x 655 x 1250 | 800 x 800 x 1250 | 800 x 800 x 1580 |
External Dimensions W x D x H (mm) | 800 x 1095 x 1020 | 800 x 1095 x 1220 | 800 x 1095 x 1420 | 800 x 1095 x 1620 | 800 x 1095 x 1820 | 960 x 1370 x 1950 | 960 x 1370 x 2270 |
Temperature Range & Accuracy | 10°C to 60°C, ± 1°C | ||||||
Humidity Range (Rh) & Accuracy | 40% to 95%, ± 3% | ||||||
Temperature & Humidity control | Microprocessor with Capacitance type sensor | ||||||
Display | 4″ LCD Screen, Large size Display for ease of reading | ||||||
Power Failure Alarm | Visual Alarm | ||||||
Door Open Alarm | Audio Visual Alarm in case door open for over one minute | ||||||
Humidity/Temperature Variation Alarm | Set Humidity ± 3% Rh, Set Temperature ± 1°C, Audio Visual Alarm | ||||||
Illumination | 8 Watts Fluorescent Tube | ||||||
Internal Body Material | IStainless Steel – 316 grade | ||||||
External Body Materia | Stainless Steel – 304 grade | ||||||
Insulation | I70 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam | ||||||
Noise Level | Less Than 65 db(A) | ||||||
Recommended Voltage Stabilizer | VS-04 | VS-07 | VS-07 |
Supply: 220-240 Volts, 50 Hz Single Phase.
Be the first to review “STABILITY CHAMBERS”