HUMIDITY CHAMBERS / SEED GERMINATORS
Humidity Chambers are designed for testing of electronic, electrical components, corrosion studies on mechanical parts, shelf life studies on paints, varnishes and cement at respective manufacturing facilities. These chambers control precise temperature and Humidity.
These chambers are available in standard & GMP versions.
SALIENT FEATURES
- Precise monitoring of temperature and humidity conditions
- Temperature range 10°C to 60°C, Humidity range 40% to 95% RH
- Unique design of thermal barrier for better energy efficiency
- Machine filled PUF insulation to eliminate void pockets
- Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
- Heating by long life SS tubular heaters
- Hermetically sealed Compressor with CFC free refrigerant
- Chamber calibration port on side
- Adjustable trays
- Output for remote alarm
- Microprocessor controller with LCD display & capacitance type sensor
- 4″ attractive LCD display for direct display of humidity & temperature
- Auto tuning of controller
- Settable High / low alarm points with date and time
- Centronic interface to record Temperature, Humidity, Date & Time by attaching Dot Matrix printer with Adjustable print interval
- Remi “Datasoft”™ data acquisition software as per 21 CFR part 11 requirements (Optional)
- Power failure and resumption recorded with date and time
- PC communication through RS-485 with data acquisition software
- High temperature safety cut off & alarms for high / lowset parameters
- Low water level alarm and power cutoff of boiler tank heater
- Overload cut off relay for compressor
- Rounded inner chamber for easy cleaning
- Attractive door profile
- Data logger for 8 Point (4+4) temperature / humidity recording with sensor, printer interface and software (Optional)
- Optional
- Touch screen display ( TFT ) with additional features(Details overleaf)
- Validation protocol with IQ, OQ, PQ Documentation
Technical Data | |||||||
CHM-6 Plus | CHM-10 Plus | CHM-12 Plus | CHM-16 Plus | CHM-19 Plus | CHM-28 Plus | CHM-35 Plus | |
---|---|---|---|---|---|---|---|
Internal Volume (Liters) | 200 | 280 | 370 | 450 | 540 | 800 | 1000 |
Number of Shelves | 2 | 3 | 4 | 5 | 6 | 6 | 7 |
Internal Dimensions W x D x H (mm) | 660 x 655 x 450 | 660 x 655 x 650 | 660 x 655 x 850 | 660 x 655 x 1050 | 660 x 655 x 1250 | 800 x 800 x 1250 | 800 x 800 x 1580 |
External Dimensions W x D x H (mm) | 800 x 1095 x 1020 | 800 x 1095 x 1220 | 800 x 1095 x 1420 | 800 x 1095 x 1620 | 800 x 1095 x 1820 | 960 x 1370 x 1950 | 960 x 1370 x 2270 |
Temperature Range & Accuracy | 10°C to 60°C, ± 1°C | ||||||
Humidity Range (Rh) & Accuracy | 40% to 95%, ± 3% | ||||||
Temperature & Humidity control | Microprocessor with Capacitance type sensor | ||||||
Display | 4″ LCD Screen, Large size Display for ease of reading | ||||||
Power Failure Alarm | Visual Alarm | ||||||
Door Open Alarm | Audio Visual Alarm in case door open for over one minute | ||||||
Temperature / Humidity Variation Alarm | Set Humidity ± 3%, Set Temperature ± 1°C, Audio Visual Alarm | ||||||
Illumination | 8 Watts Fluorescent Tube | ||||||
Internal Body Material | Stainless Steel – 304 grade (Standard Models), Stainless Steel – 316 grade (GMP Models) | ||||||
External Body Material | Powder Coated CRCA Steel (Standard Models), Stainless Steel – 304 grade (GMP Models) | ||||||
Insulation | 70 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam | ||||||
Noise Level | Less Than 65 db(A) | ||||||
Recommended Voltage Stabilizer | VS-04 | VS-07 |
Be the first to review “HUMIDITY CHAMBERS / SEED GERMINATORS”